Reasons Your Hot Water Heater Isn't Working
Reasons Your Hot Water Heater Isn't Working
Blog Article
Listed here below you will find a good deal of worthwhile answers in regards to Hot Water Heater Repair.
Several contemporary houses make use of an electrical hot water heater for their heating unit, due to its ease as well as ease of use. Nonetheless, similar to any other electrical appliances, problems might emerge with its use, suddenly. It can be really discouraging to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't warm sufficient or even also hot. Whatever the instance might be, water heater troubles can be rather nerve-racking. The good news is, we've made a list of feasible solutions to your hot water heater problems. There are a number of aspects that might create much of these issues, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the major power supply for security. Whatever the problem is, getting it taken care of need to not present too much of a problem if you follow these actions:
Call A Professional:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water required in your home. Whatever the instance may be, an expert plumber would certainly help fix the problem.
Inspect Your Power Supply:
As standard as this may appear, it is really required. Without appropriate power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the concern, simply turn it on and off once more. Replace any type of busted or damaged fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to examine the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This must aid heat the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been resolved.
Check the Heating Element in the Water Heater:
If it's not a power issue, after that attempt checking out your heating element if it is still working. Evaluate each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is damaged, change that component and then examine whether the warm water is back on.
Verdict
Water heater problems are not always major. Many of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the defective parts ought to do the trick. However, if you are still unable to resolve the problem, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our part on No Hot Water — Water Heater Repair. Many thanks for taking the time to browse our piece of content. Do you know about somebody else who is involved in the subject? Do not hesitate to share it. Bless you for your time. Visit us again soon.
Top Article
Report this page